u.s. cage code 06324 ipt series bayonet lock connectors www.glenair.com e-mail: sales@glenair.com b-46 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. ipt 01 a...sr in-line receptacle connector with backshell, cable clamp and bushing application notes 1. in-line receptacle with backshell, cable clamp and bushing for cable protection. 2. connector class a (non-environmental ) CCno grommet supplied. 3. standard materials confguration consists of aluminum alloy with stainless steel coupling pins. 4. standard contact material consists of copper alloy with gold plating over nickel. 5. a broad range of other front and rear connector accessories are available. see our website and/or contact factory for complete information. 6. standard insert is high insulation synthetic rubber. ipt 01 e 18-11 s z c sr xx mil-c-26482 series l type 01 - in-line receptacle connector class a - non-environmental shell size and insert arrangements contact gender p - pin s - socket mod code options see table ii cable clamp and bushing contact type c - crimp (omit for solder cup) alternate insert rotation (w, x, y, z) omit for normal g b
u.s. cage code 06324 ipt series bayonet lock connectors www.glenair.com e-mail: sales@glenair.com b-47 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2008 glenair, inc. printed in u.s.a. table i: dimensions shell size b 0.25 e max. g 0.1 l max. n thread 8 3.2 20.60 17.3 45.1 6 - 32 10 4.8 22.20 21.8 45.1 6 - 32 12 7.9 25.40 25.1 45.1 6 - 32 14 9.5 28.60 28.6 45.1 6 - 32 16 12.7 30.20 30.6 48.4 6 - 32 18 15.9 36.50 33.2 48.4 8 - 32 20 15.9 36.50 36.5 54.8 8 - 32 22 19.0 43.65 39.6 54.8 8 - 32 24 20.3 43.65 43.1 56.4 8 - 32 ipt 01 a...sr in-line receptacle connector with backshell, cable clamp and bushing table ii: modification codes shell finish (omit for standard cad/olive drab finish) assembly with accessories (omit for standard version) f2 - bright nickel plating (rohs) key polarization (omit for n version) w, x, y, z = alternates f6 - black electrodeposited paint (rohs) n0 - connector less backshell f7 - black zn-co plating (rohs) nxxx - custom designed connector f8 - olive drab zn-co plating standard finishes (for qq-a-591 aluminum shells) requirements iaw rohs not iaw rohs f2 electrolytic nickel f6 black non conductive f7 black conductive g3 cadmium with olive drab passivation f8 zinc cobalt with olive drab passivation thermal shock -40c + 100c -55c + 125c -55c + 125c -55c + 125c -40c + 100c salt spray after thermal shock 24 hour 500 hour 500 hour 500 hour 200 hour electical conductivity very good no very good very good good abrasion resistance very good very good good very good good
|
